华为路由交换升级-华为路由器如何升级
图1 配置路由器作为FTP Client升级系统文件组网图
操作步骤
1.设备的基本配置
#
interface GigabitEthernet0/0/0
ip address 10.1.1.2 255.255.255.0 //用于连接Server的IP地址
2.查看设备启动时使用的系统文件与配置文件信息
MainBoard:
Startup system software: sd1:/software.cc
Next startup system software: sd1:/software.cc
Backup system software for next startup: null
Startup saved-configuration file: sd1:/initcfg.cfg
Next startup saved-configuration file: sd1:/initcfg.cfg
3.从FTP Server端下载系统文件并查看是否下载成功
Trying 10.1.1.1 ...
Press CTRL+K to abort Connected to 10.1.1.1.
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(192.168.200.1:(none)):huawei
331 Give me your password, please
Enter password:
230 Logged in successfully
[Huawei-ftp]binary
200 Type is Image (Binary)
[Huawei-ftp]get
software_new.cc
200 PORT command okay
150 "D:\ftp\software_new.cc" file ready to send (77582080 bytes) in i mage / Binary mode ................................................................................ ................................................................................ ................................................................................ ................................................................................ ................................................................................ ................................................................................ ................................................................................ ...............................
226 Transfer finished successfully.
FTP: 77582080 byte(s) received in 152.403 second(s) 509.05Kbyte(s)/sec.
[Huawei-ftp]quit
221 Windows FTP Server (WFTPD, by Texas Imperial Software) says goodbye
Directory of sd1:/
Idx Attr Size(Byte) Date Time(LMT) FileName
5 -rw- 69,363,072 Nov 21 2011 19:58:50 software.cc
7 -rw- 77,582,080 Dec 14 2011 10:28:31 software_new.cc
4.指定设备启动时使用的系统文件
software_new.cc This operation will take several minutes, please wait.........
Info: Succeeded in setting the file for booting system
5.重新启动设备
Info: The system is comparing the configuration, please wait. Warning: All the configuration will be saved to the next startup configuration. Continue ? [y/n]:n
System will reboot! Continue ? [y/n]:y
Info: system is rebooting ,please wait...
6.重启后完毕Telnet到设备，验证配置结果
MainBoard:
Startup system software: sd1:/software_new.cc
Next startup system software: sd1:/software_new.cc
Backup system software for next startup: null
Startup saved-configuration file: sd1:/initcfg.cfg
Next startup saved-configuration file: sd1:/initcfg.cfg
配置注意事项
- PC端需使能FTP服务器功能，并存放系统文件。
- 保证设备操作期间，不能出现断电重起现象，断电后，会导致信息丢失，设备无法正常启动。
