交换机当内部网关，负责内部流量的转发，路由器负责外部流量

小编：迷魂雪更新时间：2022-04-19

拓扑图

适合内部流量较大的小网络。

1、配置路由器基础部分

The device is running! system-view #进入系统视图 Enter system view, return user view with Ctrl+Z. [Huawei]sysname AR #修改设备名称 [AR]interface GigabitEthernet 0/0/0 #进入接口0/0/0 [AR-GigabitEthernet0/0/0]ip address 10.11.12.13 24 #配置IP地址及子网掩码 [AR-GigabitEthernet0/0/0]ping 10.11.12.1 #检测连通性 PING 10.11.12.1: 56 data bytes, press CTRL_C to break Reply from 10.11.12.1: bytes=56 Sequence=1 ttl=128 time=80 ms Reply from 10.11.12.1: bytes=56 Sequence=2 ttl=128 time=10 ms Reply from 10.11.12.1: bytes=56 Sequence=3 ttl=128 time=10 ms Reply from 10.11.12.1: bytes=56 Sequence=4 ttl=128 time=10 ms Reply from 10.11.12.1: bytes=56 Sequence=5 ttl=128 time=10 ms --- 10.11.12.1 ping statistics --- 5 packet(s) transmitted 5 packet(s) received 0.00% packet loss round-trip min/avg/max = 10/24/80 ms [AR-GigabitEthernet0/0/0]quit #退出端口 [AR]interface GigabitEthernet 0/0/1 #进入端口0/0/1 [AR-GigabitEthernet0/0/1]ip address 192.168.1.253 24 #配置IP地址及子网掩码 [AR-GigabitEthernet0/0/1]quit #退出端口

2、配置交换机

The device is running! system-view #进入系统视图 Enter system view, return user view with Ctrl+Z. [Huawei]sysname Switch #修改设备名称 [Switch]interface Vlanif 1 #进入vlanif 1接口（三层接口） [Switch-Vlanif1]ip address 192.168.1.254 24 #配置IP地址及子网掩码 [Switch-Vlanif1]ping 192.168.1.253 #检测连通性 PING 192.168.1.253: 56 data bytes, press CTRL_C to break Reply from 192.168.1.253: bytes=56 Sequence=1 ttl=255 time=70 ms Reply from 192.168.1.253: bytes=56 Sequence=2 ttl=255 time=30 ms Reply from 192.168.1.253: bytes=56 Sequence=3 ttl=255 time=40 ms Reply from 192.168.1.253: bytes=56 Sequence=4 ttl=255 time=50 ms Reply from 192.168.1.253: bytes=56 Sequence=5 ttl=255 time=40 ms --- 192.168.1.253 ping statistics --- 5 packet(s) transmitted 5 packet(s) received 0.00% packet loss round-trip min/avg/max = 30/46/70 ms [Switch-Vlanif1]quit #退出vlanif接口 [Switch]ip route-static 0.0.0.0 0.0.0.0 192.168.1.253 #配置默认路由

3、路由器nat部分

[AR]dns server 114.114.114.114 #配置dns服务器地址 [AR]dns resolve #开启dns功能 [AR]acl 2001 #创建acl 2001 [AR-acl-basic-2001]rule permit source 192.168.1.0 0.0.0.255 #匹配允许的ip地址及长度 [AR-acl-basic-2001]quit #退出acl 2001 [AR]interface GigabitEthernet 0/0/0 #进入端口0/0/0 [AR-GigabitEthernet0/0/0]nat outbound 2001 #配置nat方向及匹配规则 [AR]ip route-static 0.0.0.0 0.0.0.0 10.11.12.1 #添加默认路由